Our portable urination device is a kind of urine collection device specifically designed to help people who are bedridden and paralyzed to collect and manage, which is no need to wear on body and do not touch skin, no hurt, no limitation in posture and use place. Definitely safe and hygienic！

Using the urination device could not be simpler. All the user has to do is put on the cotton underwear, attach the silicone cup, turn on the device and then urinate at your own convenience. And this is how does our urination device work:

1. The user urinates and urine gathers in the urine collection cup.
2. The metal urine sensor probe detects urine and triggers the suction pump within 0.5 seconds.
3. The urine is sucked down the drainage tube and into the collection bottle. The device keeps pumping for six seconds to ensure nothing is left behind in the tube even when there is no urine gathering in the urine collection cup.

At this below table, all size data was measured manually, please note that it is normal if there is 1-2cm error.

P.S. As per our test data, the suction rate is different in different positions between urine collection cups and urine collection bottles: 

Urine collection cup is 50cm above the urine collection bottle: 1.50 L/Min   (We really do recommend this position)
Urine collection cup is parallel to the urine collection bottle: 1.38 L/Min        (We comparatively recommend this position)
Urine collection cup is 50cm below the urine collection bottle: 1.02 L/Min   (We do not recommend this position very much)

Normally, male’s urination rate is 0.90-1.26 L/Min and female’s urination rate is 1.20-1.38 L/Min, which means that our device is totally able to support the user’s need in urination rate.

The urination device host is made up of three main parts:

1. PCB control circuit board
2. Micro vacuum pump
3. Wires and cables

The circuit board is attached to a 188 LED segment display tube and two control buttons. We have designed everything to be so small that they can fit within the lid of the urine collection bottle, without compromising on quality of performance. That ensures everything runs smoothly and looks neat.

Every step of the PCB control circuit board manufacturing and testing process is carried out by experienced and professional engineers. Every minute detail directly impacts the quality of the user experience, which is why we dedicate so much time to mastering the art of the circuit board. This is the beating heart of the urination device. 

The vacuum pump provides the power we need to transport the urine from the silicone cup to the collection bottle while keeping the entire urination device running smoothly. The DC Micro Pump we use is small, lightweight, and high-performing. We also chose our pump with longevity and consistency in mind to provide top-tier performance over a long period of time.

When alkaline liquids like urine come into contact with the sensor probe, the vacuum pump is triggered within 0.5 seconds to suck the urine down the drainage tube and into the urine collection bottle. We opted to go with a 0.5-second reaction time to prevent the risk of leakage. We also added a feature that keeps the suction pump running for six seconds to ensure that every drop of urine is removed from the drainage tube. The drainage tube also includes insulated wire to connect the circuit board with the sensor. The wire is insulated with tape to prevent corrosion or electricity conduction from the urine. We also selected a strong and stretch-resistant wire to reduce the risk of breakages during movement.

1. The entire lid interface is designed to be functional yet simple. The display screen features just two buttons – ON/OFF and START to ensure it is easy to understand even for elderly users who live alone.
2. The display screen is connected to the PCB circuit board via 188 LED segment display tubes. It records the number of times the device has been used and how much power is left. It even prompts the user when power is running low. The counter ticks up whether the device pumps urine away automatically or whether the user manually clicks START. After the device is turned on, it will display how much power is left. The number displaying the remaining power will flash continuously to remind of charging when the power is below 10%.  A green lightning symbol will flash in the top right corner when charging.
3. To turn on the device, hold down the ON/OFF button for 2-3 seconds. You should always click START when turning the device on to clean out the drainage tube and change the air within the system to promote better hygiene.

Our urine collection cup is designed to fit the natural configuration of the human body. The inside of the cup is deep and wide to reduce the risk of skin-to-urine contact. The internal dimensions are 5cm by 10cm by 12cm which is designed to fit all adults. The one-size-fits-all collection cup is made with flexible silicone to ensure it can bend to the shape of the user’s preference.

The medical-grade silicone used to make our collection cup is a similar material to the one used in baby pacifier production. That is the commitment we have to skin-friendly materials. This ensures there will be less skin allergies and no chemical odors, and the cup should be both safe and comfortable. The flexible material also allows the cup to conform to the shape of the user without deforming or causing pain.

Hygiene and safety are always at the top of our priority lists. That is why we took inspiration from nature’s lotus leaf to add a coating of superhydrophobic material on all types of silicone cup to ensure that every drop of urine flows away into the drainage tube. This reduces any risk of leakage or residue urine coming into contact with the skin.

Our unisex handheld urine collection cup can easily be transported around. Unlike the wearable version, the user can place the handheld device against their crotch during urination and then hang the device on the bedside ready for future use.

The silicone collection cup contains a groove at the bottom to neatly house the metal urine sensor probe. This is a much more elegant design than a hard interface as it allows a direct connection between the cup and the probe. This cuts down on friction, extending the life of the probe, while also removing the need for an uncomfortable bulge at the bottom of the cup that could otherwise irritate the user’s skin. Plus, the quick-insert design for the urine sensor probe simplifies the set-up process of the whole device which is convenient for the elderly.

We tested out a number of different drainage tube lengths before settling on the perfect option of 160cm (62.99”) which supports the user’s movement on the bed. We found that this provides the user with flexible mobility without the tube becoming too long or cumbersome. The tube itself is made from premium rubber to ensure it can twist, stretch, and deform under pressure without breaking. This also protects the valuable wire inside from damage too, thus improving the longevity of the entire system. 

We designed our control components to be small enough to fit inside the lid of the urine collection bottle. This means we can keep them safely tucked away, protecting them from dirt and damage. 

We designed our collection bottle with ease and comfort in mind. The large 2000ml capacity ensures even the average 24-hour urine output of an adult can fit inside. This means you will only need to empty the bottle once per day. This also cuts down on the washing of any soiled underwear or bedding.

The lid is designed to be secure and leak-free but also easy to open during the disposal process. Simply pinch the two grooves on the side of the lid and remove the cover. It is so easy that an elderly user can open the lid even if they live alone.

Our dust-proof bag is designed to:

• Keep the device and accessories together and safe.
• Hold the urine collection bottle and tie it to the bed in unique cases when the drainage tube is not quite long enough for the user.

We have made our urination device as simple as possible to promote easy use for the elderly and less mobile. Avoiding complex steps, easy to operate!

Step 1. Put on the underwear
Step 2. Insert the metal urine sensor probe into the urine collection cup
Step 3. Turn on the device

Want to know more details? Please click here!

Our devices are reusable and durable to be washed repeatedly. We recommend to do daily clean and deep clean, daily clean with warm water and running room-temperature water while deep clean with light salt water.

Concrete steps please click here!