With cautious maintenance, it will accompany with you for longer time…
Daily Clean
How to Clean the Underwear
Step 1
Scrub a small amount of detergent on any stains and soak the underwear in warm water with more detergent for 10 minutes.
Step 2
Gently hand-washing the underwear should get rid of most minor stains, but you can apply more force for stubborn stains. Do not use any brushes or scouring pads on the underwear, or else you risk damaging the fabric.
Step 3
After washing, rinse the underwear with clean running water twice, wring it out, and leave it to air dry.
Warm Tips
-
Do not put the underwear in the washing machine. Do not put the underwear in a tumble dryer.
- For hygiene, we recommend that underwear should be washed every day. (We provide extra two more pairs of underwear free of charge for every user to have clean changed at any time)
How to Clean the Urine Collection Cup
Step 1
Removing the urine collection cup from the underwear, rinsing it in running water until the urine stains on the inner wall is none.
Step 2
Brushing the inside and outside of the collection cup with a soft-bristled brush. Keep rinsing when brushing.
Step 3
After rinsing and brushing, dry the cup by air or clean tissue.
Warm Tips
- The cup is better to be cleaned once everyday.
- Some folding areas are easy to hide, like stains, try to brush these areas cautiously.
- When brushing, it is better to brush the cup along with its shape.
How to Clean the Drainage Tube
Step 1
Fill a small bucket with clean water. Ensure the urine collection bottle lid is screwed tight to avoid any leaks.
Step 2
Put the metal sensor probe into the bucket of water and press START. The probe will detect the water and trigger the pump to suck the clean water down the tube and into the collection bottle. This will clean the inside of the tube as it goes.
Step 3
The outside of the tube can be cleaned under running water. To dry, use a clean tissue or towel, or just let it air dry. Once the process is finished, empty out the collection bottle.
Warm Tips
-
We recommend cleaning the tube once every two days to avoid stains.
-
Please avoid bending the tube to ensure the inner wire remains protected.
-
Please do not try to detach the tip of the tube that connects to the lid.
How to Clean the Urine Collection Bottle
Step 1
Filling the bottle with appropriate water with an amount of detergent, waiting for 5 minutes.
Step 2
With a rubber glove and a long-handle brush, brush the inside of the bottle to get rid of urine stains. Remember to check the inside of the handle for hidden stains.
Step 3
Rinse the bottle inside and out, then leave to air dry in a ventilated area.
Warm Tips
-
We recommend rinsing it every day and washing it every three days.
-
You don’t need to rinse the lid of the bottle, just wipe it with a tissue and alcohol.
-
Please keep water away from the power interface stored inside the lid.
-
Please keep water away from where the drainage tube connects to the bottle.
- The inner closing to the handle is easy to hide stains, please pay more attention to the area when brushing.
Deep Clean
Disinfecting Probe
We recommend disinfecting the metal probe once a week by using light salt water for three minutes. On the days in between, use alcohol tissues to wipe it down.
Disinfecting the Drainage Tube
Fill a container with light salt water and put the probe into the water, then press START. The device will pump the salt water through the pipe to clean it.
Disinfecting the Urine Collection Bottle
Deeply clean 1-2 times a week.
Fill the urine collection bottle with light salt water and leave it to soak for 10 minutes before scrubbing inside with a brush – then leave it to dry.
Warm Tips
- There is a risk of damaging the probe if the density of salt water is too high. Therefore, the amount of salt should be appropriate as per the amount of water you prepare.